Expert Answers about Trailer Lights
- What Is Difference In Wiring For Replacement Lights On Trailer
- The wiring on any lights you put on your trailer depends on the functions you are using the lights for.
It sounds like you are wanting to replace the clearance or marker lights on your trailer. If you have one wire, it will be attached to the running light wiring and the light will be grounded through the mounting hardware.
If you have 2 wires, it will typically be attached to the running light circuit and the second wire will be a ground. and attached to any clean bare metal surface....
view full answer... - What Lights Are Needed For Trailer That Is 96 Inches Wide And 144 Inches Long
- I have attached a helpful article that explains what lights are needed for trailers. Putting lights on a trailer are based on the width, length, and Gross Vehicle Weight Rating (GVWR). To find the GVWR you can look on the trailer tongue or frame for a sticker or tag that lists the rating. Here is a list of the lights and markers required for your trailer if it has a GVWR less than 10,000 lbs. Each of the items list their features and sizes that you can use to determine what you want to...
view full answer... - Replacement Right Hand Tail Light Cover On 2005 Heritage Boat Trailer
- Trailer manufacturers use many different size and style lights for their trailers so I cannot tell you exactly what kind of light you have on your Heritage. I did some research and saw the newer trailers have LED lights.
As far as covers for the light, I have attached a link to the light covers we offer. You will need to know the tail light number to find an exact match. The part number for the light assembly is typically found on the body of the light.
You may decide to replace the...
view full answer... - Why is the Optronics LED Clear Oval Trailer Utility Light # BUL72CB Not Certified as a Backup Light
- The Sealed, 6-1/2 inch Oval LED Trailer Utility Light, Flange Mount, 10 Super Diode - Clear, item # BUL78CB, does not meet DOT FMVSS 108 requirements, for backup lights so it cannot be sold as a backup light. That does not mean that the light cannot be used in that situation for applications where a DOT requirement does not need to be met.
In short, the Trailer Utility Light, item # BUL78CB, can be used as a backup light, but if your trailer needs to meet DOT requirements you will need...
view full answer... - What Lighting Functions Does a Tow Ready 4-Way Vehicle Wiring Harness Provide
- Trailer wiring harness # 118551 will provide the basic light functions: left and right turn signals, brake lights, and running lights (tail lights). It will not provide reverse lights which are not common on trailers in the US. If your trailer does have reverse lights then it likely has something other than a 4-Way flat connector. If you can tell me the type of trailer connector on the trailer and the specific year, make, and model of the vehicle I can make sure we get you the proper connector.
If...
view full answer... - Adding Side Marker Lights to Open Utility Trailer
- Yes, side marker lights can be added to your open utility trailer. When adding these lights you will just need to make sure that you do not exceed the amp rating of the trailer wiring harness.
In an effort to add lights to your trailer without exceeding the amp rating of the trailer wiring harness, I recommend going with an LED light like the Double Bullseye LED Trailer Clearance and Side Marker Light, # MCL45AB. This light draws a mere 0.087amps at 12.8 volts.
view full answer... - Federal Requirement for Trailer Lighting and Best Options for Adding Lights to a Utility Trailer
- There are minimum lighting requirements for trailers that vary based on trailer size and weight, but to our knowledge there are no maximum limits for trailer lights, provided that all the mandatory lighting is installed. We've recapped the federal requirements in the linked article which will give you specifics. I am sure there is a law enforcement officer out there somewhere that might pull over a motorist for having what he/she considers "excessive" trailer lighting, lighting that is...
view full answer... - Cant Tell the Difference Between the Brake Lights and Tail Lights when Brakes are Engaged
- With the running lights on, the lamp should get brighter when the brake is applied. If it does not, check to make sure that lamp is properly grounded to the trailer frame, and that the connections are secure and not corroded. These functions use the same bulb.
The trailer interior lights are usually wired into the running light circuit, so try turning them on with the vehicle's headlights on. They are sometimes wired into the accessory (battery feed) as well.
view full answer... - Trailer Lighting Fuse Locations in 2018 Ram 3500
- According to the online owner's manual for the 2018 Ram 3500, the fuses related to trailer lighting and trailer power are below. The fuse location, fuse value and function are listed for you.
F81 20 Amp Yellow Trailer Tow Right Turn/Stop Lights
F53 20 Amp Yellow Trailer Tow – Left Turn/Stop Lights
F28 20 Amp Blue Trailer Tow Backup Lights – If Equipped
F29 20 Amp Blue Trailer Tow Parking Lights – If Equipped
F30 30 Amp Pink Trailer Tow Receptacle
I'll also link you to a wiring troubleshooting...
view full answer... - Trailer Wiring and Lights For Rewiring 5' X 8' Trailer With Reverse Lights And Side Marker Lights
- Both the Peterson Piranha LED Clearance and Side Marker Trailer Light w/ Turn Signal # M353A and Miro-Flex LED Trailer Side Marker Light and Mid-Ship Turn Signal # OPT78FR are sold individually. We do not offer them as a pair for lower price.
Since you mentioned replacing your wiring the 25 Ft 5-Way Trailer Wiring Harness # A25W5B is a great starting point. You will need to add additional 20 gauge wire to run the reverse line circuit back to the tail lights.
You will need the Tow Ready...
view full answer... - Which Trailer Light Kit is Best for a Jet Ski Trailer
- Trailer light kit # TL29BK does not include submersible lights, so water would be able to enter the light housings.
A better choice for your jet ski trailer would be a submersible light kit # TL5RK, as the lights will be sealed against water.
I would recommend, however, that you unplug the trailer connector and let the bulbs cool down a bit before backing into the water, so that the cold water will not crack the bulbs. This is good practice, also, because it lets your wheel bearings...
view full answer... - Replacement LED Tail Light For Pacific Trailer
- We have LED trailer lights available. If you have the dimensions of the light you want to replace that would help in finding the right replacement for your Pacific trailer.
From my research I found that some of the Pacific trailers use part # STL42RB. This is a 4-inch round flange mount light that has 10 LEDs. It is a three function stop/turn/tail light.
If you need a flush-mount light, we also have part # STL43RB. this is also a 3-function 10-LED light.
If you are looking for an oval...
view full answer... - Are There Interior LED Lights for Enclosed Trailer
- We have many different LED lights for the interior of an enclosed trailer, though I'm not 100 percent sure what you are referring to by shop-type lights. But we have lights such as the Opti-Brite LED RV Dome Light # ILL10CCB and Gustafson 12V RV LED Puck Light # 277-000489.
I have added a link below to our entire selection of LED lights for the interior of an enclosed trailer.
view full answer... - Fuses for Trailer Light and Power Functions in 2014 Jeep Grand Cherokee Laredo
- I checked the online version of the owner's manual for the 2014 Jeep Grand Cherokee Laredo and according to information starting on page 574 the following fuse positions relate to the various trailer lighting and related circuits. There are multiple circuits relating to trailer lights.
The cover of the power box in the engine compartment may also provide details on the appropriate fuses for each of the circuits.
F11 30 Amp Pink - Trailer Tow Electric Brakes
F28 20 Amp Yellow - Trailer...
view full answer... - 2019 Chevy Silverado Not Detecting LED Trailer Lights
- The issue you are having definitely could be that the LED trailer lights aren't pulling enough power for your 2019 Chevy Silverado to read the lights are connected, causing the message you are seeing. That's more than likely what is happening, and there's a couple options for you.
- Trailer Connector Adapter with Lamp-Out Sensor Bypass # 20142
- 7-Way Trailer Adapter for Trailers with LED Lights # C57003
Either of these will do the job for you if the issue is the LEDs not pulling enough...
view full answer... - How to Determine Correct License Plate Light for Trailer
- License plate lights are universal so there aren't any specific fits for a 2018 Hyundai trailer, which means in order to determine the correct one, you only need to measure the width of the mounting holes. Knowing this spacing will allow you to get the correct light; for example, here are a few options:
- 3-1/2" Between Mounting Holes: Optronics LED Trailer License Plate Light with Bracket # LPL56CB
- 3" Between Mounting Holes: LED Trailer License Plate Light with Mounting Bracket # 328-003-70BE
-...
view full answer... - Wiring CE Smith Post-Style Guide-On LED's To Brake Light Circuit Versus Running Lights
- The LED lights on the CE Smith Post-Style Guide-Ons # CE27760 do not have separate wiring for only the red portion of the LED Cap Light # CE27656A. They are normally used to act as running lights to make maneuvering the trailer easier in low light conditions as well as providing an extra marker light for other vehicles on the road to better see the boat and trailer. If you would rather wire these lights to your brake lights circuits there would not be an issue with that.
Do understand...
view full answer... - Can Too Many LED Trailer Lights Make Them Dim
- Yes, too many lights, be it tail lights like the Optronics FLEET Count LED Backup Light for Truck or Trailer # BUL12CFB or clearance lights like the LED Trailer Clearance or Side Marker Light # MCL32RB can make them dim.
That said, LED lights are far less likely to do that, as they draw much less power; for example, the FLEET backup light only draws 0.260 amps, and the LED clearance only draws 0.06 amps, so you'll simply need to ensure you don't overload it based on whatever your converter...
view full answer... - Submersible License Plate Light and Bracket for Boat Trailer
- We do have license plate lights that are submersible and can be used on your boat trailer, though the Optronics LED Trailer License Plate Light w/ Bracket # LPL55CB is not submersible.
Instead, you will need the Optronics LED Trailer License Plate Light with Bracket - Submersible # LPL56CB. I have added a link to a video review of this light for you to check out.
view full answer... - Does Non-Working Turn Signal of Oval Trailer Tail Light Mean New Bulb is Needed
- If your turn signal is not working but the other lights are, it could mean a replacement bulb is needed, though to verify you will want to test the light with Circuit Tester # PTW2979.
If the signals are getting through you will need a new bulb, otherwise it could be the wiring or a replacement light is needed. If you do need a replacement oval tail light you will want to get one that has the same or similar measurements, and that mounts the same. For example the 7-9/16" long x 3-5/16"...
view full answer...
Go To Results